LENOVO_Lenovo TB-8504X_TB-8504X_S000029_170703_ROW_2017-06-01 UMT RED FILE - Vai Vai Telicom Patgram - Firmware File Download

Thursday, September 10, 2020

LENOVO_Lenovo TB-8504X_TB-8504X_S000029_170703_ROW_2017-06-01 UMT RED FILE

 

 





Operation    : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM16)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.1.0
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID    : E1600500 [8917] 00000000
OPK_DATA    : 8D38F8EB0CBB95080DCEDFBE45E94AC61F6F97294B272A65DBFB3329E55CB750
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_017]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8917, eMMC, 16 GB
LU Count    : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [modem_0.img] -> [modem]...Done
Writing [sbl1_0.img] -> [sbl1]...Done
Writing [sbl1bak_0.img] -> [sbl1bak]...Done
Writing [rpm_0.img] -> [rpm]...Done
Writing [rpmbak_0.img] -> [rpmbak]...Done
Writing [tz_0.img] -> [tz]...Done
Writing [tzbak_0.img] -> [tzbak]...Done
Writing [devcfg_0.img] -> [devcfg]...Done
Writing [devcfgbak_0.img] -> [devcfgbak]...Done
Writing [dsp_0.img] -> [dsp]...Done
Writing [DDR_0.img] -> [DDR]...Done
Writing [sec_0.img] -> [sec]...Done
Writing [splash_0.img] -> [splash]...Done
Writing [aboot_0.img] -> [aboot]...Done
Writing [abootbak_0.img] -> [abootbak]...Done
Writing [boot_0.img] -> [boot]...Done
Writing [recovery_0.img] -> [recovery]...Done
Writing [system_0.img] -> [system]...Done
Writing [cache_0.img] -> [cache]...Done
Writing [persist_0.img] -> [persist]...Done
Writing [misc_0.img] -> [misc]...Done
Writing [mdtp_0.img] -> [mdtp]...Done
Writing [cmnlib_0.img] -> [cmnlib]...Done
Writing [cmnlibbak_0.img] -> [cmnlibbak]...Done
Writing [cmnlib64_0.img] -> [cmnlib64]...Done
Writing [cmnlib64bak_0.img] -> [cmnlib64bak]...Done
Writing [keymaster_0.img] -> [keymaster]...Done
Writing [keymasterbak_0.img] -> [keymasterbak]...Done
Writing [gpt_main0.bin] -> [gpt_main0] ...Done
Writing [gpt_back0.bin] -> [gpt_back0] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 4.9.1