L6601_JHD_3310_V3_61D_2SIM_PCB01_gprs_MT6261_S00.L6601_JHD_3310_V3_61D_2SIM.bin

link

Click Here To Start Download

Operation : Read Flash [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

FF257M90_C10_JAX_TINMO_312_F27_V05_128X160_EN_BE_20191011_142729
Project Version:   SC6531EFM_BAR
MMI Version:       SC6531EFM_BAR
BASE  Version:     BASE_SVN
HW Version:        SC6531EFM_BAR
10-11-2019 14:34:25
LOG Version:      V1.0.1
UCOM
Saved to : C:\Users\hp\Desktop\Click Here To Start Download\FF257M90_C10_JAX_TINMO_312_F27_V05_128X160_EN_BE_20191011_142729.bin

Done!
Elapsed: 00:00:41

Reconnect Power/Cable!

link

Click Here To Start Download
 

                                    

Infinity Box install CM2 MT2 v2.03 Full Setup
► Infinity Box Update

Infinity Chinese Miracle-2 MTK/Mediatek v2.03 - MT817x Series support, new features

► Base:
Base - DA v1844 support tested on all platforms
Base - MT8172 support activated
Base - MT8173 support activated
Base - MT8176 support activated
Base - Info reading improved ( in some cases device info can be empty )
Base - Startup issues on some machines fixed
Base - Autoupdate feature revised

► MemoryTool:
MemTool - Partition types detection improved
MemTool - InitPreloader option revised

► Flasher:
Flasher - Activated flashing support for LEGACY signed FW types ( ver3, ver4 )
Flasher - Customization model revised
Flasher - DL Fix / ADL Checksum revised
Flasher - Cheksum issue on 6572/6582 fixed
Flasher - MT6570 NAND support fixed
Flasher - Flashing support for secure FW readout from LEGACY signed devices ( fused )
Flasher - More info, state and other debug stuff during secure types flashing

► FWReader:
FWReader - Activated reading for LEGACY secured phones ( for fused devices )
FWReader - Secure state and signature type info during reading
FWReader - Secure workaround for cpu-paired security on fused devices ( FW completey safe for flashing )
FWReader - More types supported for safe read
FWReader - Info reading improved ( in some cases device info can be empty )

► Other:
Other - Preloader parsing issues with some new platforms fixed
Other - Lot of small fixes and changes, reported by users
Other - BootHelper updated

► Service:
Service - Security repair revised
Service - FixDL option activated
Service - Format FS revised, ENCRYPTION issues, bootloop issues fixed on some platforms/devices

► Platform:
Platform - MT8172 support activated
Platform - MT8173 support activated
Platform - MT8176 support activated
Platform - MT2601 support activated
Platform - MT6582 support optimized
Platform - MT6572 support optimized

► Loaders:
LoaderDB - New agents included (Teksun, Lenovo, Tecno, CAT, COMIO, Gionee) 

link

Click Here To Start Download

Operation : Write Flash [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

BIN : Format UserData
BIN : Format UserData Ok!

Done!
Elapsed: 00:01:28

Reconnect Power/Cable!
 

Click Here To Start Download

Card found : 05CA6496 , v0138
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.05

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Read Flash [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read Flash [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

Platform Version: MOCOR_16A.Itel_W18.19.4_Debug
G1812_it5618N_32x32_320X240BAR_EnBn_BD
Project Version:   it5618N-G1812-EnBn-BD-20200806
MMI Version:       it5618N-G1812-EnBn-BD-20200806
BASE  Version:     BASE_SVN
HW Version:        sc6531efm_bar
08-06-2020 15:34:15
LOG Version:      V1.0.1
Saved to : C:\Users\hp\Desktop\Click Here To Start Download\MOCOR_16A.Itel_W18.19.4_Debug
G1812_it5618N_32x32_320X240BAR_EnBn_BD.bin

Done!
Elapsed: 00:00:39

Reconnect Power/Cable!
 

Click Here To Start Download 

 Card found : 05CA6496 , v0138
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.05

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Read Flash [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

FF126M10_B10_YM_JL_Z24418A_V09_240X320_EN_BE_20191230_215340
Project Version:   SC6531EFM_BAR
MMI Version:       SC6531EFM_BAR
BASE  Version:     BASE_SVN
HW Version:        SC6531EFM_BAR
12-30-2019 22:06:22
LOG Version:      V1.0.1
UCOM
Saved to : C:\Users\hp\Desktop\Click Here To Start Download\FF126M10_B10_YM_JL_Z24418A_V09_240X320_EN_BE_20191230_215340.bin

Done!
Elapsed: 00:00:40

Reconnect Power/Cable!

Click Here To Start Download